AWARD
®
BIOS Setup
3-31
Frequency/Voltage Control
Auto Detect DIMM/PCI Clk
Use this item to enable or disable the feature of auto detecting the clock
frequency of the installed DRAM DIMMs and PCI bus. Settings are
Enabled (default) and Disabled.
CPU Host Clock (CPU/PCI)
This item specifies the clock frequency of CPU host bus (FSB) and PCI bus
and provides a method for end users to overclock the processor
accordingly. If the item shows Default, the clock frequency will use the
default value for both the CPU host bus and PCI bus.
CPU1/2 Clock Ratio
The items are used to select the CPU frequency multiplier (ratio) for CPU1/
CPU2 and provides a method for overclocking the processor(s). Settings are
from X 3 to X 8.
↑ ↓ → ←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Auto Detect DIMM/PCI Clk Enabled
CPU Host Clock (CPU/PCI) Default
CPU1 Clock Ratio X 3
CPU2 Clock Ratio X 3
CPU1 Vcore Select Default
CPU2 Vcore Select Default
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Frequency/Voltage Control
Item Help
Menu Level !
To Next Page
Loading...
