MSI 694D Pro2 - Power Management Setup

AWARD
®
BIOS Setup
3-21
Power Management Setup
IPCA Function
This item is to activate the ACPI (Advanced Configuration and Power
Management Interface) function. If your operating system is ACPI-aware,
such as Windows 98SE/2000/ME, select Enabled. Settings are Enabled and
Disabled. Default is Enabled.
Power Management
Press <Enter> to enter the sub-menu for power management options.
↑ ↓ → ←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
IPCA Function Enabled
Power Management Press Enter
PM Control by APM Yes
Video Off Option Suspend --> Off
Video Off Mehtod V/H SYNC + Blank
MODEM Use IRQ 3
Soft-Off by PWRBTN Instant-Off
State After Power Failure Off
LED In Suspend Single
Wake Up Events Press Enter
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Power Management Setup
Item Help
Menu Level !
!
!