MS-7280 Mainboard
B-2
RAID Configuration
Creating and deleting RAID set and performing other RAID setting up operations are
done in the RAID BIOS. During bootup, a screen similar to the one below will appear
for about few seconds. Press <Ctrl-F> to enter the FastBuild utility.
The Fast Build Utility menu screen will appear. The Main Menu is used to choose the
operation to be performed.
Important
Be sure to set the OnChip SATA Type to “RAID” in BIOS (the path is :
Intergrated Peripherals => IDE Devices Configuration => OnChip SATA
Type) before configuting the RAID BIOS.
7327v1.0-B_ATIRAID.p65 2007/4/13, 上午 10:402
To Next Page
Loading...
