MSI K9AGM - Installing the RAID Driver under W Indows (for Non-Bootable RAID Array

B-9
ATi SATA RAID
Installing the RAID Driver Under Windows
(for Non-bootable RAID Array)
1. Insert the MSI CD into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Under the Driver tab, click on ATI System Driver. The ATI System Driver
includes ATI RAID Driver.
4. The driver will be automatically installed.
Important
You must install the RAID driver to enable RAID.
7327v1.0-B_ATIRAID.p65 2007/4/13, 上午 10:419