Getting Started
1-5
Quick Components Guide
Component Function Reference
DIMM 1~2 Installing memory modules See p. 2-5~2-6
Socket 462 Installing CPU See p. 2-2~2-3
C_FAN1 Connecting to CPUFAN See p. 2-15
S_FAN1 Connecting to SYSFAN See p. 2-15
ATX Power Supply Installing power supply See p. 2-7
IDE1& IDE2 Connecting to IDE hard disk drive See p.2-14
FDD1 Connecting to floppy disk drive See p.2-13
JUSB1 Connecting to USB interfaces See p. 2-19
JCASE1 Connecting to chassis intrusion switch See p. 2-19
PCI Slot 1~3 Installing expansion cards See p. 2-23
CNR Slot Installing CNR cards See p. 2-23
ISA Slot Installing ISA cards See p. 2-23
JFP1/2 Connecting to the case See p. 2-17
JIR1 Connecting to IrDA infrared module See p. 2-16
JAUD2 Connecting to Audio ports See p. 2-18
JMDM1 Connecting to modem module See p. 2-20
JWOL1 Connecting to LAN card See p. 2-20
JBAT1 Clearing CMOS data See p. 2-21
JFSB1 Setting CPU Front Side Bus frequency See p. 2-22
JCD1 Connecting to CD-ROM audio connector See p. 2-16
To Next Page
Loading...
