MSI MS-6378 - Frequency and Voltage Control Settings

Chapter 3
3-30
Frequency/Voltage Control
Auto Detect DIMM/PCI Clk
This item is used to auto detect the DIMM/PCI slots. When set to Enabled,
the system will remove (turn off) clocks from empty DIMM/PCI slots to
minimize the electromagnetic interference (EMI). Settings: Enabled,
Disabled.
Spread Spectrum Modulated
This item is used to configure the clock generator’s Spread Spectrum feature.
Settings: Disabled, Enabled. Always disable the feature when overclocking
the processor.
CPU Host/PCI Clock
This item specifies the clock frequency of CPU host bus (FSB) and PCI bus.
It provides a method for end users to overclock the processor. If the item
shows Default, the clock frequency will use the default value for the CPU
host bus and PCI bus.
This section describes how to set the CPU FSB frequency, spread spectrum
etc.
↑ ↓ → ←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Modulated Enabled
CPU Host/PCI Clock Default
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Frequency/Voltage Control
Item Help
Menu Level 8