Using 4- or 6-Channel Audio Function
A-3
4-Channel Analog Audio Output
Description:
Connect two speakers to back panel’s Line Out
connector and two speakers to one Line Out
connector of S-Bracket.
1
2
3
2-Channel Analog Audio Output
We recommend that you should still attach the speakers to BACK
PANEL’s Line Out connector during 2-channel audio mode even though S-
Bracket’s Line Out connectors function properly.
Back Panel S-Bracket
1
2
3
1 Line Out (Front channels)
2 Line In
3 MIC
Back Panel
1 Line Out (Front channels)
2 Line In
3 MIC
4 Optical SPDIF jack
5 Coaxial SPDIF jack
6 Line Out (Center and Subwoofer channel)
7 Line Out (Rear channels)
6
7
4
5
To Next Page
Loading...
