MSI MS-7067 - Irda Infrared Module Header: IRDA; Front Panel Connector: JFP1, F_PANEL (Optional)

2-13
Hardware Setup
Front Panel Connector: JFP1 or F_PANEL (Optional)
The mainboard provides front panel connectors for electrical connection to the
front panel switches and LEDs. The JFP1 is compliant with Intel
®
Front Panel I/O
Connectivity Design Guide.
PIN SIGNAL DESCRIPTION
1 HD_LED_P Hard disk LED pull-up
2 FP PWR/SLP MSG LED pull-up
3 HD_LED_N Hard disk active LED
4 FP PWR/SLP MSG LED pull-up
5 RST_SW_N Reset Switch low reference pull-down to GND
6 PWR_SW_P Power Switch high reference pull-up
7 RST_SW_P Reset Switch high reference pull-up
8 PWR_SW_N Power Switch low reference pull-down to GND
9 RSVD_DNU Reserved. Do not use.
JFP1 Pin Definition
JFP1
12
910
HDD
LED
Reset
Switch
Power
LED
Power
Switch
IrDA Infrared Module Header: IRDA
The connector allows you to connect IrDA Infrared module. You must config-
ure the setting through BIOS to use the IR function.
PIN SIGNAL
1 VCC
2NC
3 IRRX
4 GND
5 IRTX
Pin Definition
PIN SIGNAL PIN SIGNAL
1 HDD LED (+) 8 HDD LED (-)
2 Power LED (-) yellow 9 Case Speaker
3 Power LED (-) green 10 Case Speaker
4 Power LED (+) 11 NC
5 Power Switch (+) 12 VCC
6 Power Switch (-) 13 Reset (+)
7 NC 14 Reset (-)
F_PANEL Pin Definition
IRDA
1
1
7
8
14
F_PANEL