MSI MS-7067 - Independent Power Switch Connector: FRISW (Optional)

2-16
MS-7067 M-ATX Mainboard
Front Panel Audio Connector: JAUD1 or F_AUDIO (Optional)
The front panel audio connector allows you to connect the front panel audio.
The JAUD1 is compliant with Intel
®
Front Panel I/O Connectivity Design Guide.
Independent Power Switch Connector: FRISW (Optional)
The connector is connected to an independent power switch on the case.
Touch the power switch’s touch pad will turn on/off the computer.
FRISW
GND
+5VSB
PS-ON
1
Pin Description Pin Description
1 MIC 2 GND (MIC)
3 Front Line Out (R) 4 Line Next (R)
5 Front Line Out (L) 6 Line Next (L)
7 GND 8 Key
F_AUDIO Pin Definition
F_AUDIO
1
2
7
8
JAUD1
1
2
9
10
PIN SIGNAL
1 MIC
2 GND
3NC
4 +5V
5 Front Line Out (R)
JAUD1 Pin Definition
PIN SIGNAL
6 Front Next (R)
7NC
8 Key
9 Front Line Out (L)
10 Front Next (L)
MSI Reminds You...
If you don’t want to connect to the front audio header, pins
5, 6, 9, & 10 of the JAUD1 (pins 3, 4, 5, & 6 of the F_AUDIO)
have to be jumpered in order to have signal output directed
to the rear audio ports. Otherwise, the Line-Out connector
on the back panel will not function.
F_AUDIO
JAUD1