3-2
BIOS Setup MS-S0121
Entering Setup
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press <DEL> or <F2>
key to enter Setup.
Press <DEL> or <F2> to enter SETUP
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button. You
may
also
restart
the
system
by
simultaneously pressing
<Ctrl>, <Alt>,
and
<De-
lete> keys.
Important
The items under each BIOS category described in this chapter are under continu-
ous update for better system performance. Therefore, the description may be
slightly different from the latest BIOS and should be held for reference only.
To Next Page
Loading...
