3-11
BIOS Setup MS-S0121
Aggressive Link Power Management
Aggressive Link Power Management (ALPM) is a power-saving technique that
helps the disk save power by setting a SATA link to the disk to a low-power
setting during idle time (that is when there is no I/O). ALPM automatically sets
the SATA link back to an active power state once I/O requests are queued to
that link. ALPM is only available on SATA controllers that use the Advanced
Host Controller Interface (AHCI).
Info Report Conguration
Post Report
This setting enables/disables the post report.
Info Error Message
This setting enables/disables the error message report.
Summary Screen
This setting enables/disables the system summary screen.
▶
▶
▶
▶
▶
To Next Page
Loading...
