MSI PRO MP161 E2 User Manual

16
Troubleshooting
The power LED indicator is not on.
 Press the power button on the monitor again.
 Check if the power cable of the monitor is properly connected.
There’s no image.
 Check if the computer and graphics card are installed correctly.
 Check if the computer and monitor are connected to the power socket and powered normally.
 Check if the signal cable of the monitor is correctly connected.
 The computer may be in standby mode. Press any key to start the monitor.
The image is not centered or the size is abnormal.
 Refer to the default display mode and set the computer as the setting fit for the setting of the
monitor.
Plug and play does not work.
 Check if the power cable of the monitor is properly connected.
 Check if the signal cable of the monitor is correctly connected.
 Check if your computer and graphics card support Plug and Play.
Icons, fonts and screens are blurry or there are color problems.
 Do not use any extended video transmission cables.
 Adjust brightness and contrast.
 Adjust RGB color or adjust color temperature.
 Check if the signal cable of the monitor is correctly connected.
 Check if the signal cable connector has any bent pins.
The monitor flashes or ripples.
 Adjust the screen update rate in the computer setting to meet the monitor specifications.
 Update the graphics card driver.
 Keep the monitor away from electronic devices that may cause electromagnetic interference
(EMI).

MSI PRO MP161 E2 Specifications

General

Color depth	6 bit
Pixel pitch	0.17925 x 0.17925 mm
Screen shape	Flat
Display diagonal	15.6 \
Anti-glare screen	Yes
Display technology	LED
Native aspect ratio	16:9
Vertical scan range	50 - 60 Hz
Maximum refresh rate	60 Hz
Horizontal scan range	111 - 138.9 kHz
Viewable size, vertical	193.59 mm
Contrast ratio (dynamic)	100000000:1
Contrast ratio (typical)	600:1
Display number of colors	262000 colors
Display diagonal (metric)	39.6 cm
Viewable size, horizontal	344.16 mm
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
USB Type-C downstream ports quantity	2
AC input voltage	110 - 240 V
AC input frequency	50/60 Hz
Power consumption (off)	0.3 W
Power consumption (standby)	- W
Package depth	301 mm
Package width	430 mm
Package height	62 mm
Package weight	1600 g
Tilt angle range	0 - 180 °
Cable lock slot type	Kensington
Product color	Black
RMS rated power	3 W
Product type	Portable monitor

Weight and Dimensions

Depth	17.8 mm
Width	362.26 mm
Height	232.92 mm
Depth (with stand)	39 mm
Width (with stand)	147.91 mm
Height (with stand)	8.5 mm
Weight (with stand)	750 g
Depth (without stand)	9.17 mm
Width (without stand)	14.26 mm
Height (without stand)	0.74 mm