19
German Rheinland TUV certification
German Rheinland TUV Low Blue Light certification
Blue light has been proven to cause eye fatigue and discomfort.
MSI Microstar Technology
now provides the screen that has been awarded the German
Rheinland TUV low blue light certification to ensure the comfort
and health of user’s eyes. Please follow the instructions below to
operate the screen so as to reduce the symptoms caused by long
exposure to the screen blue light.
Place the screen 20-28 inches (50-70 cm) from the eyes,
with the cente
r point of the screen slightly lower than the line of sight.
When you need to use the screen for a long time, blink your eyes consciously from time to time will help
reduce eye fatigue.
Rest for 20 minutes every 2 hours.
At rest, remove your eyes from the screen and gaze at distant objects for at least 20 seconds.
Stretch moderately during rest to relieve fatigue or pain of your body.
Activate the optional low blue light function.
German Rheinland TUV Flicker Free (non-flickering ) certification
TUV Rheinland has tested this product to determine
whether it produces v
isible and invisible flickers to the
human eyes and make the user's eyes fatigued.
TUV Rheinland has defined the test items and listed the
minimum standards with various frequency ranges. The
test items are based on internationally applicable
standards or the general standards in the industry, and they
are even more stringent than these standards.
This product has been tested in the laboratory according to the above standards.
The keyword "Flicker Free" confirms that under various brightness settings, this product has no visible and
inv
isible flicker defined in the standard within the frequency range of 0 - 3000 Hz
When Anti Motion Blur/MPRT is enabled, the monitor will stop supporting the Flicker Free function.
(Whether there is the Anti Motion Blur/MPRT function depends on the actual product.)
ENERGY STAR certification
ENERGY STAR is a program implemented by the U.S. Environmental Protection Agency
(EPA) and the U.S. Department of Energy (DOE) to improve energy efficiency. The
product meets the qualification of ENERGY STAR in the "factory default”, and the
purpose of en
ergy conservation can be achieved through this setting. Changing factory
default picture setting or enabling other features will increase power consumption, which
may exceed the limit required to obtain ENERGY STAR rating.
To learn more about ENERGY STAR, visit
https://www.energystar.gov/.
To Next Page
Loading...
