To Next PageTo Next PageHow to clean the water in my mspa Nest?
To clean the water in your MSpa Hot Tub, start by changing the water if it has been used for a long time. Ensure you extend the filtration time. Regularly clean or replace the filter cartridge. Also, maintain proper water balance by referring to the chemical manufacturer’s instructions.
Details on site selection, load bearing, drainage, and clearance for setup.
Instructions for testing the Portable Residual Current Device before each use.
Steps for unboxing, preparing the site, and initial assembly of the spa.
Procedure for resetting the heater and inflating the spa tub wall to the correct pressure.
Guidance on reading the manometer and maintaining correct air pressure in the spa tub.
Specific setup instructions for the U-NE022 model, including side bar placement.
Steps for attaching and installing the filter cartridge and its base.
Instructions on how to fill the spa with water, including depth and temperature.
Steps for covering the spa and connecting to power for heating.
Explains the LED display and basic button functions on the controller panel.
Details on how to turn the heater on/off, adjust temperature, and heating tips.
Covers filtration system operation, cleaning reminders, and auto-filtration.
Instructions for bubble massage, heating timer, UVC, and Ozone functions.
How to toggle temperature units and activate the safety lock feature.
Instructions for inspecting, cleaning, and replacing the filter cartridge for optimal performance.
Tips on water change frequency, showering before use, and covering the spa.
Guidance on keeping water sanitized and maintaining correct chemical levels (pH, Chlorine, etc.).
Step-by-step guide on how to drain water from the spa tub and dry it.
Instructions for cleaning the spa tub interior, filter cartridge, and avoiding abrasive materials.
Procedures for deflating the spa tub and the air bladder for storage or repair.
Advice for using the spa in summer, including placement and air pressure checks.
Guidance on inflating and heating the spa in low temperatures to prevent damage.
Tips for heating and preserving heat in cold weather, including anti-icing system.
Information on the spa's water resistance and precautions during rain.
Guide to error codes displayed on the LED, their causes, and solutions.
Common problems, their causes, and recommended solutions for spa operation.
How to find serial numbers and contact local MSpa dealers or service centers.
Details on the one-year limited warranty, coverage, and exclusions.
General
