MTD 380 - Page 19

19
Model Series 340 Thru 345
Ref.
No.
Part No. Part Description
1. 712-0392 Hex L-Stop nut 1/4-28
2. 736-3020 Flat Wash.266” I.D. X.625” O.D.
3. 710-0599 Hex Washer Screw 1/4-20 x.5”
4. 711-0920 Belt Cover Bolt
5. 712-3004A Hex Flange Top L-Nut 5/16-18
6. 710-0723 Hex Hd. Scr. 3/8-16 x 1.25” Lg.
7. 756-0313 Fl-Idler 2.12” O.D.
8. 786-0149 Idler Belt Keeper
9. 786-0144 Idler Bracket
10. 712-0266 Hex Cent. Jam Nut 3/8-16 Thd.
11. 786-0056 Belt Cover
12. 710-0599 Hex Washer Screw 1/4-20 x.5”
13. 786-0035A Tine Shield
14. 710-3008 Hex Hd. Cap Scr. 5/16-18 x.75” Lg
15. 712-3004A Hex Flange Top L-Nut 5/16-18
16. 686-0091 Chain Case Assembly Complete
18. 714-0149B Internal Cotter Pin
19. 711-0415 Clevis Pin
20. 642-0005 Outer Tine Assembly L.H.
642-0004 Outer Tine Assembly R.H.
21. 642-0003 Inner Tine Assembly L.H.
642-0002 Inner Tine Assembly R.H.
22. 746-0918 Forward Clutch Cable
23. 786-0053 Tine Shield Bracket
24. 736-0171 L-Wash. 7/16” I.D.
25. 712-0240 Hex Nut 7/16-20 Thd.
26. 710-0502A Hex Washer Screw 3/8-16 x 1.25”
27. 786-0145A Engine Plate
28. 786-0039B Bracket Cover
29. 736-0119 Lock Washer 5/16
30. 710-0107 Hex Bolt 5/16-24 x.5”
31. 756-0971 Inner Engine Pulley Half
32. 756-0972 Outer Engine Pulley Half
33. 736-0258 Flat Washer.385 ID x 1.0 OD
34. 736-0169 Lock Washer 3/8
35. 710-0191 Hex Bolt 3/8-24 x 1.25”
36. 736-0112 Bell-Wash.525” I.D. x 1.5” O.D.
37. 712-3029 Hex Jam Nut 1/2-20 Thd. (Gr. 5)
38. 736-0312 Retainer Washer Bearing
39. 756-0585 Fl-Pulley 6” Dia.
40. 754-0428 V-Belt (Forward)
41. 750-0892 Spacer.64” Dia. x 2.4” Lg.
42. 748-0350 Pulley Mounting Adapter
Ref.
No.
Part No. Part Description