Need help?Do you have a question about the MTD 315E640F000 and is the answer not in the manual?
General| Self-Propelled | No |
|---|---|
| Engine Type | 4-Cycle |
| Clearing Width | 21 inches |
| Throwing Distance | 30 feet |
| Auger Type | Steel, Serrated |
| Stages | Single-Stage |
| Chute Control | Manual |
| Starter Type | Recoil |
Read owner's guide, be familiar with controls, and proper use.
Inspect area, remove debris, wear proper clothing, handle fuel safely.
Safety precautions for using the snow thrower, including hand/foot placement.
Regular checks, lubrication, and proper storage procedures.
List of hardware components for attaching the handle assembly.
List of hardware components for attaching the chute assembly.
List of hardware components for attaching the chute crank.
List of hardware components for shift rod and clutch cables.
Steps for safely removing the snow thrower from its packaging.
Identification of all included loose parts prior to assembly.
List of necessary tools for assembling the snow thrower.
Detailed steps for attaching the handle components.
Steps for mounting the snow discharge chute.
Instructions for connecting the chute direction control.
Procedure for connecting the gear shift mechanism.
Steps for connecting the drive and auger clutch control cables.
How to adjust skid shoes for different snow conditions.
Information on installing and using an electric starter.
Recommended tire pressure settings for pneumatic tires.
Explanation of the snow thrower's main control levers and functions.
How to engage and disengage the auger and wheel drive systems.
How to use the crank to change the direction of snow discharge.
Instructions for adding fuel and oil to the engine.
Procedures for starting the engine using recoil or electric start.
Safe procedures for shutting down the snow thrower engine.
How to engage the drive system for snow thrower movement.
Information on using optional tire chains for added traction.
Advice for efficient snow removal and safe operation.
How to adjust the chute angle to control snow discharge distance.
Procedure for adjusting the traction drive clutch for proper engagement.
How to adjust skid shoes for ground clearance and wear.
Referencing final adjustment section for auger clutch.
Guidance on minor carburetor adjustments for performance.
Adjusting drive wheels for single or dual wheel drive operation.
Lubrication points and schedule for snow thrower components.
Information on auger shear bolts and potential replacement.
Instructions for removing and replacing auger drive belts.
Procedure for removing and replacing the main drive belt.
Steps for replacing worn friction wheel rubber.
Procedures for preparing the snow thrower for long-term storage.
Steps for emptying fuel tank and carburetor for storage.
Adding oil to the cylinder for storage protection.
Cleaning the unit and applying protectants for storage.
Common causes and corrective actions for starting issues.
Troubleshooting steps for inconsistent engine operation.
Diagnosing and fixing issues causing reduced engine power.
Causes and solutions for excessive vibration during operation.
Where to find and record model and serial number information.
Contact information for ordering MTD original equipment parts.
To Next Page
