MTD 380 - Page 23

23
Model Series 390
REF.
NO.
PART NO. DESCRIPTION
1. 712-0392 Hex L-Stop nut 1/4-28
2. 736-3020 Flat Wash.266” I.D. x.625” O.D.
3. 710-0599 Hex Washer TT-Tap Scr. 1/4-20 x.5”
4. 711-0920 Belt Cover Bolt
5. 712-3004A Hex Flange Top L-Nut 5/16-18 (Gr.5)
6. 710-0723 Hex Hd. Scr. 3/8-16 x 1.25” Lg. (Gr.5)
7. 756-0313 Flat Idler Pulley 2.12” O.D.
8. 786-0149 Idler Belt Keeper
9. 786-0144 Idler Bracket
10. 712-0266 Hex Cent. Jam Nut 3/8-16 Thd.
11. 786-0057 Belt Cover
13. 786-0043A Tine Shield
14. 710-3008 Hex Hd. Cap Scr. 5/16-18 x.75” Lg
16. 686-0091 Chain Case Assembly Complete
17. 686-0106 Outer Disc Plate Assembly
18. 714-0149B Internal Cotter Pin
19. 711-0415 Clevis Pin
20. 642-0023 Outer Tine Assembly L.H.
642-0024 Outer Tine Assembly R.H.
21. 642-0003 Inner Tine Assembly L.H.
642-0002 Inner Tine Assembly R.H.
22. 746-0918 Forward Clutch Cable
23. 746-0953 Reverse Clutch Cable
24. 756-0585 Fl-Pulley 6” Dia.
25. 750-0892 Spacer.64” Dia. x 2.4” Lg.
26. 748-0350 Pulley Mounting Adapter
27. 736-0112 Bell-Wash.525” I.D. x 1.5” O.D.
28. 712-3029 Hex Jam Nut 1/2-20 Thd. (Gr. 5)
29. 732-0697 Return Spring
30. 786-0040B Reverse Bracket
31. 736-0119 Lock Washer 5/16
32. 710-0237 Hex Bolt 5/16-24 x.625”
33. 756-0971 Engine Inner Half Pulley
34. 756-0600 Reverse Engine Pulley
35. 736-0452 Bell Washer.396” I.D. x 1/14” O.D.
36. 710-0152 Hex Bolt 3/8-24 x 1.00”
38. 686-0013 Reverse Arm Assembly
42. 786-0041 Reverse Belt Keeper
43. 710-0502A Hex L-Wash. TT-Tap 3/8-16 x 1.25”
44. 786-0145A Engine Plate
45. 786-0053 Tine Shield Bracket
46. 736-0171 L-Wash. 7/16” I.D.
47. 712-0240 Hex Nut 7/16-20 Thd.
48. 754-0428 V-Belt (Forward) 1/2 x 41.9”
49. 754-0429 V-Belt (Reverse) 3/8 x 45.68”
50. 738-0102 Shld. Screw.498 x 1.445
51. 738-0930 Shld. Screw.560 x.165
52. 710-0805††† Screw 5/16-18 x 1.50
53. 712-3010††† Hex Nut 5/16-18
54. 736-0242††† Bell Washer
REF.
NO.
PART NO. DESCRIPTION
††† Honda Engine