MTD 550 - User Manual

Operator's Manual
Edger
Models 520
550
551
Model 550 and 551 Shown
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A.
FORM NO. 769-00527C
(10/03)

Summary

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

TRAINING

Read, understand, and follow all instructions before operation.

PREPARATION

Inspect area, wear safety gear, and handle gasoline safely.

OPERATION

Safe operation rules including blade control and guards.

GENERAL SAFETY WARNINGS

Warnings on safety devices, indoor use, alcohol, hot surfaces, visibility, and blade condition.

SECTION 2: ASSEMBLING YOUR EDGER

SECTION 3: KNOW YOUR EDGER

SECTION 4: OPERATING YOUR EDGER

Adding Gasoline And Oil

Instructions for safely adding fuel and oil to the engine.

Starting The Engine

Step-by-step guide to starting the edger engine.

Stopping The Engine

Procedure for safely shutting down the edger engine.

SECTION 5: MAKING ADJUSTMENTS

SECTION 6: MAINTAINING & SERVICING YOUR EDGER

SECTION 8: TROUBLESHOOTING

MTD 550 Specifications

General

Brand	MTD
Model	550
Category	Edger
Language	English