To Next PageTo Next Page
Need help?Do you have a question about the MTD 25B-551A700 and is the answer not in the manual?
This symbol points out important safety instructions which, if not followed, could endanger personal safety.
Tragic accidents can occur if operator is not alert to presence of children.
To avoid personal injury or property damage use extreme care in handling gasoline.
Be completely familiar with the controls and the proper use of this machine before operating it.
Remove and discard any packaging cardboard that may be present between the upper handle and the lower handle.
Locate the rope guide found on the right side of the upper handle.
Identifies key parts like the recoil starter, blade control, and adjustment levers.
Covers adding fuel and oil, starting, and stopping the engine for safe operation.
Guides on performing edging, adjusting blade bevel, and edging along curbs.
Details on lubricating wheels, bearings, pivot points, and bearing blocks for longevity.
Procedures for replacing the edger blade and drive belt with safety precautions.
Guidelines for preparing the edger for long-term storage to prevent rust and corrosion.
General