51
ENGLISH
GB
CHAIN SAW OPERATING MANUAL
PERIODIC MAINTENANCE :
This periodic maintenance table refers to a standard use. For particu-
larly rough and intense terms of use, the maintenance intervals must
be consequently reduced
FOLLOW THE SPECIFIC INSTRUCTIONS CONTAINED IN THIS
MANUAL
before each job
after each job
each 50 hours
each 100 hours
every year
anomalies ; wear ;
damages
Machine
Visual check X
General cleaning X
Air cooling slots cleaning X
Cylinder fins cleaning X
Chain brake
Working check X
Check at service centre X
Throttle trigger lookout;
throttle trigger;
engine stop switch.
Working check X
Air filter
Cleaning X
Replacement X
Fuel filter Replacement X X
Fuel and oil tank Cleaning X
Carburetor
Engine idling check X
Check the chain is not moving while the
engine is idling
X
Idling adjustment X
Screws
Tightening check:
- Accessibile screws
- Handles fixing screws
X
Chain
Lubrication check X
Sharpness check X
Tension check X
Replacement X
Drive sprocked
Wear and damages check. Bearing check
and lubrication
X
Replacement X
Bar
Cleaning X
Wear and damages check X
Replacement X
Spark plug
Electrode gap check X X
Replacement X X
To Next Page
