76
First time out
The control panel will ask for setting a PIN code when the first time power on. Please remember the PIN code
you set.
Pressing the start button and closing the flap will cause the mower to start a perimeter circuit after which it
will begin randomly mowing the lawn.
First time out
The first few mows will appear random and unfinished, this is normal. With the multiple passes the mower
makes over time, this will even out, and by using zoning and spiral mowing a desirable effect can be
achieved in less time. These methods are explained on page 79 and 80.
New season mowing
Between mowing seasons when the mower is not operating (during winter months) the grass can become
unkempt and thickets emerge. On new season setup review mowing pass and address any problem areas.
To Next Page
Loading...
