1. Press the power button for 3 seconds.
2. Enter the 4-letter PIN code you set.
3. The mower will now await further instruction in
standby mode.
1. Press the power button for 3 seconds.
1. Press START button
2. Close the cover to start
3. Note: If the battery is below 70% charge, the
mower enters „charge to work“ mode until it
reaches 90% charge. If lower than 30% the
mower returns to base station to charge.
In standard mowing mode the mower will proceed
in a random fashion around your garden, changing
direction each time it reaches the boundary wire.
To Next Page
Loading...
