78
Work time setting
This is the amount of time the mower will be active. This includes charging time. For example: if set to 8
hours and the mower is set to operate from 8:00pm it will operate until 4:00am. In this time it may mow for
1 hour charge for 2 hours mow again for 1 hour; charge for 2 hours, mow for one hours and return to charge
ready for the next cycle.
1. Press OK button to enter sub-menu 1.
2. Select „setting“ to enter sub-menu 2.
3. Select „work time“.
4. Set work time by UP and DOWN buttons. (default is 8hrs)
5. Press OK button to confirm setting.
You may want to stop the mower during its cutting cycle. To do this:
1. Press the STOP button.
2. The mower stops immediately and the control
panel hatch opens.
3. The screen shows „emergency stop“
4. Press OK or RETURN button.
5. Enter the PIN code
6. If the mower was running when the STOP button
was pressed, the screen will show „continue to
work?“. You can then either press OK to
continue the task, or press RETURN to cancel it.
1. Press HOME “Click once“.
2. Close the cover and mower will return to station
for charging.
To Next Page
Loading...
