MTS Systems 318 Series User Manual

318 Load Unit
16
Introduction
What you
need to know
MTS Systems Corporation assumes that you know how to use your controller.
See the appropriate manual for information about performing any controller-
related step in this manual’s procedures. You are expected to know how to
perform the following procedures:
• Turn hydraulic pressure on and off
• Select a control mode
• Adjust the actuator position
• Zero a sensor signal
• Zero a sensor output
• Use your grips and fixtures
• Define a simple test
• Run a test

MTS Systems 318 Series Specifications

General

Brand	MTS Systems
Model	318 Series
Category	Test Equipment
Language	English