MTS Systems Exceed 40 Series User Manual

MTS Exceed™ Series 40 Product Manual
34
Specifications
Introduction
Specifications of Model E44
Exceed model
E44.104 E44.304
Maximum rated force capacity 10 kN (2200 lbf) 30 kN (6600 lbf)
Force capacity options 100 N, 250 N, 500 N,1 kN, 2kN,
5 kN, 10 kN
100 N, 250 N, 500 N,1 kN, 2kN,
5 kN, 10 kN, 20 kN,30 kN
(20 lbf, 50 lbf, 110 lbf, 220 lbf,
450 lbf, 1100 lbf, 2200 lbf)
(20 lbf, 50 lbf, 110 lbf, 220 lbf,
450 lbf, 1100 lbf, 2200 lbf,
4400 lbf, 6600 lbf)
Frame type
Floor-standing Floor-standing
Test zone Single or Dual Single or Dual
Maximum test speed 500 mm/min
(19.7 in/min)
500 mm/min
(19.7 in/min)
Minimum test speed 0.001 mm/min (0.00004 in/min) 0.001 mm/min (0.00004 in/min)
Position resolution 0.000036 mm (0.0000014 in) 0.000040 mm (0.0000015 in)
Vertical test space crosshead travel
Standard length
Extended length
1150 mm (45.28 in)
1450 mm (57.1 in)
1150 mm (45.28 in)
1450 mm (57.1 in)
Space between columns 400 mm (15.75 in) 400 mm (15.75 in)
Frame height
Standard length
Extended length
1862 mm (73.3 in)
2162 mm (85.1 in)
1862 mm (73.3 in)
2162 mm (85.1 in)
Frame width 845 mm (33.27 in) 845 mm (33.27 in)
Frame depth 716 mm (27.19 in) 716 mm (27.19 in)
Weight
Standard length
Extended length
435 kg (959 lb)
450 kg (992 lb)
435 kg (959 lb)
450 kg (992 lb)
Power requirements 200 - 230 V AC
3 Amp
50/60 Hz
600 W
1 Phase
200 -230 V AC
6 Amp
50/60 Hz
1200 W
1 Phase
0Exceed product manual.book Page 34 Wednesday, August 27, 2014 2:55 PM

MTS Systems Exceed 40 Series Specifications

General

Brand	MTS Systems
Model	Exceed 40 Series
Category	Test Equipment
Language	English