MTS Systems FlexTest SE User Manual

Installing 497/498 Electronics (FTIIm)
MTS 793 Controller Hardware Installation
61
Model 497.01 Analog Chassis
About Analog Chassis Slots
Slot pairing Chassis slot assignments are grouped in pairs. If you have a
conditioner in a slot, then you cannot have a valve driver installed in
the slot paired with it. Slots are paired as follows:
Slot assignments The analog chassis contains 18 bus-board slots for plug-in modules.
Each slot is reserved for a particular type of plug-in module.
Slot A Reserved for the Model 497.34 Multistation Interlock Module.
Slot B Reserved for the Model 497.36 Communications Module.
Slots 1–4 These slots are reserved for up to four AC conditioners.
Slots 5–8 These slots are reserved for up to four DC conditioners.
Slots 9–12 These slots are reserved for options (not used with standard systems).
Slots 13–16 These slots are reserved for up to four valve drivers.
Slots 1–2
Slots 3–4
Slots 5–6
Slots 7–8
Slots 9–10
Slots 11–12
Slots 13–14
Slots 15–16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest SE Specifications

General

Brand	MTS Systems
Model	FlexTest SE
Category	Controller
Language	English