Front weights (1) and (5)
To preserve the normal steerability of the
tractor under considerable unloading of
the front axle when operating heavy
mounted machines and implements, in-
stall additional weights (1) (10 pieces. of
20 kg each) or weights (5) (10 pieces. of
45 kg each). The weights (1) are installed
onto a special holder (2) which is fastened
to the front beam of the tractor and is
tightened with string (4) and nut (3).
Adjustable limiter of implement lifting
(2)*
To limit the travel of drawing of the plung-
er of the rear cylinder of the hitching
mechanism (implement lifting height),
use the adjustable rest (2). To do this:
• loosen butterfly nut (4);
• move the adjustable rest (2) along the
cylinder plunger (3) to the required po-
sition and tighten the butterfly nut (4)
by hand. As the implement is lifted to
the required height, the rest (2) will
shift the stem of the hydromechanical
valve (1) and lock the cylinder cavities.
ATTENTION! To prevent the cab dam-
age by the components of the lifted im-
plement, adjust lengths of left and right
angle braces in accordance with rec-
ommendations.
___________________________________
* Only applied for tractors with independent power cyl -
inder of HMS (with power governor).
To Next Page
Loading...
