this purpose in accordance with the recommendations.
Observe the allowable values of the vertical static loads on the axles, tyres, total op-
erating weight and dimensions in the transport position!
Check the condition of the transport equipment of the machines (lighting set, warning
and safety devises). Mount this equipment on the machine!
The disconnecting ropes for the rapid-action coupling shall hang freely and shall not
become disconnected simultaneously in the bottom position.
During the motion, it is forbidden to leave the cab of the tractor!
The machines coupled with the tractor as well as ballast weights affect the transport
characteristics, steerability and braking capability. Keep it in mind when driving and braking
the tractor, especially within the MTA. Observe the distance! Take into account the possibil-
ity of skid, overhang and inertial mass of the aggregated machines in the turn!
The tractor with the machines shall be only driven provided all the safety facilities of
the machines are installed and brought to the appropriate working position!
It is strictly prohibited to be in the working zones of the machines! It is prohibited to be
in the zones of turning or revolution of the machines, their tools and other elements!
The hydraulically folding frames of the machines shall be only actuated when there
are no people in the turn or lifting zone!
The remotely controlled elements of the machines (for example, having hydraulic
control) can cause injuries (squeezing and cuts)! During the movement of the aggregate at
high speed, the driven tools cause danger due to possibility of their extension under the ac-
tion of their inertial mass! Wait until the tools are completely stopped!
Prior to leaving the cab of the tractor, lower all the machine elements to the ground,
stop the engine and remove the ignition key!
It is strictly prohibited to stand in the zone between the tractor and the machine, un-
less the transportation mean is secured against accidental rolling down by means of a park-
ing brake and/or chock and the engine is stopped!
The folding frame and bucket of the loader shall be secured in the transport position!
Prior to starting the transportation on public roads, the swinging lever of the additional
equipment of the machines, for example, packing wheel shall be turned inwards and fixed!
The markers shall be also fixed in the transport position!
The loading platform on the machine aggregated shall be only used for filling the ma-
chine with planting material and fertilizers! It is strictly prohibited to stand on the platform
during the work!
When driving the tractor on slopes and sharp turns, the track should be increased for im-
proving the stability.
10.4. Mounted and semi-mounted machines
To Next Page
Loading...
