Muller Elektronik UNI-Control S User Manual

Copyright Müller-Elektronik GmbH u. Co. UNI-Control S Installation and User´s Guide (01/95) Seite - 25 -
Datablock OPERATION (Op)
+----------------------------------------(Op)
|
v /-----------------/-----+ Left:
+-------------------------/-----------------/ | The current order number is
| O r d e r | M e n u | T1 |---> Ms displayed.
|-------------------------|-----------------|------|
| No : 5 | Y e s | T2 |---+
|-------------------------|-----------------|------| | Right:
| t o s t a r t? | N o | T3 |-->| Press the T1 key for menu selection.
|-------------------------|-----------------|------| | Press the T2 key to start the order
| | | T4 | | together with the working times.
+-------------------------\-----------------\ | | Press the T3 key if the order is not
be
\-----------------\-----+ | started yet. It is possible to
continue
| driving without the working position.
|
|
|
v
+-------------------------------+<--- (Op) When the order is started.
|
|
v /-----------------/-----_
+-------------------------/-----------------/ | Left:
| 6 . 8 k m / h | M e n u | T1 |---> Ms Here interesting data concerning the
|-------------------------|-----------------|------| operating process are displayed:
| | T e r m i n a t | T2 |---------+ speed, current application rate,
|-------------------------|-----------------|------| | adjusted deviation, from the pre-set
| 2 0 0 l / h a | B i n | T3 |------+ | rate and, with boom/section control,
the
|-------------------------|-----------------|------| | | remaining boom width.
| + 1 0 % 1 2 .0 m | N e x t | T4 |---+ | |
+-------------------------\-----------------\ | | | | Right:
\-----------------\-----+ | | | Press the T1 key for menu selection.
| | | Press the T2 key to confirm the end
of
| | | the order.
| | | Press the T3 key for bin/tank
capacity.
| | | Press the T4 key for further
operation
| | | data.
| | |
+-------------------------------+ | |
| | |
v /-----------------/-----+ | |
+-------------------------/-----------------/ | | | Left:
| 5 4. 3 l / m i n | M e n u | T1 |--->Ms| | Displays the current flow in litres
|-------------------------|-----------------|------| | | per minute and the pressure.
| | | T2 | | |
|-------------------------|-----------------|------| | |
| 2 . 6 b a r | | T3 | | | Right:
|-------------------------|-----------------|------| | | Press the T1 key for menu selection.
| | N e x t | T4 |--->Op| | Press the T4 key for operation data
+-------------------------\-----------------\ | | |
\-----------------\-----+ | |
| |
| |
| |
| |
+----------------------------------+ |
| |
| |
| | Left
v /-----------------/-----+ | Displays the current application
rate,
+-------------------------/-----------------/ | | the rest capacity in the bin/tank and
| 2 0 0 l / h a | M e n u| T1 |--->Ms | the calculated distance which can
still
|-------------------------|-----------------|------| | be worked with the rest capacity.
| 2 0 0 m | | T2 | | The set rate can be adjusted using
the
|-------------------------|-----------------|------| | +/- 10% keys so that the calculated
| 0 .3 2 h a | B i n | T3 |------+ | amount corresponds with the actual
|-------------------------|-----------------|------| | | figures,leaving no residue in the
| R e s t 6 4 l | N e x t | T4 |--->Op| | bin / tank!
+-------------------------\-----------------\ | | |
\-----------------\-----+ | |
| | Right
| | Press the T1 key for menu selection.
| | Press the T3 key for the filling of
the
| | bin / tank.
v v Press the T4 key for operation data.
www.ROLTRONIK.pl

Muller Elektronik UNI-Control S Specifications

General

Brand	Muller Elektronik
Model	UNI-Control S
Category	Desktop
Language	English