Seite - 8 - Copyright Müller-Elektronik GmbH u. Co. UNI-Control S Installation and User´s Guide (01/95)
1.3.5 Combine harvester
The area being treated, the working times and the speed are displayed.
In addition it is possible to monitor up to 8 shaft speeds from 20 to 10,000 rpm. As soon as the shaft
speed drops by more than 10% from the pre-set speed, an alarm signal is set off.
For the seives and shaker grain loss can also be monitored. The loss which can be tolerated is
programmed. If this value is exceeded an optical and acoustic alarm is released.
The equipment with art. no.: 302 621 is required for the monitoring of the combine harvester.
1.3.6 Self-propelled harvester
The program for the self-propelled harvester corresponds to that of the combine, however, instead of the
grain loss display, the rpm of the main shaft is continually displayed.
1.3.7 Universal / Telescope spreader
The UNI-Control S can control the spray rate from sludge spreaders with a hydraulic driven scraper floor
fully automatically. The rotation of the hydraulic motor as well as the spread rate can be controlled by a
motor-adjustable power control valve.
The advantages which apply to the manure cart are also valid here. Sludge can only be classed as
environmentally friendly when the permitted quantity is spread evenly on the field intended.
1.3.8 Seed machine
The UNI-Control S can be connected to the ACCORD seed machine monitor ESC by means of a machine
adapter.
A large choice of rhythms is availble for switching the tram lines.
In addition the fan, the seed shaft and the tank contents are monitored. The one-sided switch and the
quantity adjustment can be controlled with the UNI-Control S.
www.ROLTRONIK.pl
To Next Page
Loading...
Need help?
General
