Seite - 6 - Copyright Müller-Elektronik GmbH u. Co. UNI-Control S Installation and User´s Guide (01/95)
1.3 Machine programs
The UNI-Control S has the following programs:
• Field sprayer
• Pneumatic fertilizer spreader
• Single seed planter
• Manure cart
• Combine harvester
• Self-propelled harvester (e.g.turnip full harvester)
• Universal / Telescope spreader (sewage sludge)
• Seed machine
The UNI-Control S recognizes from the code on the machine plug (4), which machine is attached at any
specific time.The corresponding program and the individual machine data are called up automatically by
the UNI-Control S.
1.3.1 Field sprayer
The UNI-Control S can be used as a fully automatic monitoring instrument on the field sprayer.
The device carries out an area related control of the spray rate in relation to the set rate.
The current spray rate, speed, the area being treated, total area, the quantity sprayed, as well as the total
quantity, working time and the distance travelled are recorded continually.
With the installation of an electronic pressure sensor, the spray pressure is monitored and displayed.
The UNI-Control S can be operated with either the tank meter or with the TANK-Control.
During the filling process, the quantity filled is recorded by the tank meter. The contents are then
calculated and displayed according to the measured quantity being sprayed.
With the TANK-Control the bin´s contents are continually measured and displayed. In conjunction with this
device, the UNI-Control S can automatically switch off filling.
1.3.2 Pneumatic fertilizer spreader
Pneumatic fertilizer spreaders of the following firms can now be connected: ACCORD, AMAZONE, and
RAUCH.
With regard to the computer the monitoring and the recording of the operation data are carried out as with
the field sprayer.
Please consult our price list for the technical requirements.
www.ROLTRONIK.pl
To Next Page
Loading...
Need help?
General
