Part Number 9294699 12/16/15 37
Section 4 Maintenance
Daily Cleaning - Zone 1
NOTE: The following procedures are the basic daily cleaning
instructions, on-screen instructions can vary depending
on the recipe that was created with the MenuConnect
program. * These items are optional and may not be displayed
on all easyToUCH screens during ZONE 1 Cleaning.
n
Warning
Sharp Objects/Surfaces - Beware of the shaver blade
located in the bottom of the ice bin.
n
Warning
When in contact with cleaning and sanitizing solution
chemicals gloves and safety glasses are recommended.
• Time to complete - 15 minutes
1. Cycle touch screen to the Main Menu and select the
Cleaning icon.
2. In the Cleaning screen select the ZONE 1 icon.
GATHER THE FOLLOWING SUPPLIES
Follow the on-screen instructions and gather the following
supplies:
Clean towels (Cloths*)
Spray Cleaner & Detergent Solution
(Approved mild dish detergent solution)
Spray Sanitizer & Solution
Approved sanitizers:
Solution that provides 100 ppm available
chlorine minimum.
Or solution providing 300 ppm Quaternary
Ammonium minimum.
Or Manitowoc sanitizer part number
9405653, use 3.25 oz/5 gal (96 ml/19L).
Red & Blue Cleaning Cups
(1 of each per blender station)
Ice Scoop
Cleaning Brush, Gloves & Safety Glasses*
* These items are optional and may not be displayed on all easyToUCH
screens.
NOTE: If other cleaners are used, it is possible they will not
clean or sanitize your machine to NSF standards.
• Press the Down Arrow to continue.
UI Version 02.00.05