36
As well as the standard “Deactivated” setting, the Telemetry menu gives you two
options for the data transfer via MSB: M-LINK standard and PROFI-TX as well
as Telemetry-Display. The M-LINK standard is the correct setting for all cockpit
and royal transmitters. Pro-TX and telemetry-display provide more advanced
display options. The sensor addresses required for this can be freely selected.
Avoid double assignments at all costs. Address 1 is assigned by default to trans-
mission quality (LQI) and should therefore not be assigned differently.
14. Telemetry
Multiplex Sensor Bus (MSB)
The Multiplex Sensor Bus (MSB) system is a development from Multiplex. It
allows to connect the sensors supporting the MSB in cascades or parallel.
To Next Page
Loading...
