Multiplex WINGSTABI-7 - Specification; WINGSTABI 7;9 and RX-7;9-DR M-LINK Specifications; WingStabi LED Codes


25
4. Specication
WingStabi LED codes:
· ashing green/red: rmware update
· ashing green: system startup
· ashing red: error:
- No conguration available
- No RC signal
- Stick moves when the WingStabi is switched on
- Model moves when switched on
- Critical error, hardware failure
· green continuous: everything OK,
ailerons twitch slightly signaling
they are ready
WINGSTABI 7/9
Channels 7 or 9
Weight excl. integral receiver 27 g
Weight incl. integral receiver 35 g
Dimensions
(L x W x H)
approx. 54 x 34 x 15 mm
Operating voltage 3.5 to 9.0 V
Power supply 4 - 6 NiXX cells, 2S LiPo/Lilo
Operating temperature range –20°C to +55°C
WINGSTABI RX-7/9-DR M-LINK
Receiving system M-Link 2.4 GHz
Servo channel count 7/9
Aerial length 2 x 16 cm