SPECIFICATIONS AND RELATED INFORMATION
22 Conduit
®
Base Station IP67 Getting Started Guide for Versions 1.5 and 2.1
Pin Name Signal Name Direction Comments Where Used
P12 48-Channel
extension
board
P13
P14 FPGA_EXT_RSTn Output Input to FPGA on 48-
channel extension board
P15 EXT_SPI_PROG NA Not used (test point on 48-
channel extension board
only
P16 EXT_CONF_DONE Input Goes high to indicate the
FPGA configuration is
complete (48-channel
extension board)
P17
Outputs are active-low.
To Next Page
Loading...
