USING THE WIZARD TO CONFIGURE YOUR DEVICE
30 MultiConnect
®
rCell 100 MTR-LTE User Guide
a. From Baud Rate, select baud rate in BPS for the serial port from the drop down list. Default setting is
115200.
b. In the Flow Control field, select the flow control option from the drop down list provided. Choose
from NONE or RTS-CTS.
c. In the Parity field, select the parity option from the drop down list. Choose from NONE, ODD, or
EVEN.
d. In the Data Bits field, select the data bits option from the drop down list. Choose from 7 or 8.
e. In the Stop Bits field, select the stop bit option from the drop down list. Choose from 1 or 2.
8. Click Finish.
9. To save your settings, click Save and Restart.
To Next Page
Loading...
