DEVICE ADMINISTRATION
MultiConnect
®
rCell 100 MTR-LTE User Guide 65
Chapter 12 – Device Administration
Configuring Device Access
This section contains configurations that determine how the device can be accessed as well as security features
that decrease susceptibility to malicious activity.
To display the Access Configuration window containing the fields described below, go to Administration > Access
Configuration.
HTTP Redirect to HTTPS
The device allows only secure access to its Web UI. This set of rules provides the optional convenience of
automatically redirecting HTTP requests to the device's secure HTTPS port.
The device can be configured to allow HTTP access to its RESTFUL JSON API. Embedded devices that do not have
SSL/TLS or HTTPS capabilities can then configure, monitor, and control the device.
See the MTR API Developer Guide for more information.
Field Description
Enabled Enables HTTP to HTTPS redirect which automatically
redirects users trying to access the device via HTTP to
HTTPS.
Port The port on which the device listens for HTTP requests.
Via LAN/Ethernet If checked, the device listens and responds to HTTP
requests from the LAN.
Via WAN/Cellular If checked, the device listens and responds to HTTP
requests from the WAN.
HTTPS
The device provides secure Web UT access to modify its configurations and execute actions.
Field Description
Port The port on which the device will listen for HTTPS
requests.
Via WAN/Cellular If checked, the device will listen and respond to HTTPS
requests from the WAN. This increases susceptibility to
malicious activity.
Timeout Minutes Amount of time a user's session can remain dormant
before automatically being logged out.
Change Password Utility to change the user's password.
SSH
The device's internal system can be accessed securely via SSH. This is intended for advanced troubleshooting
and/or custom deployment solutions.
To Next Page
Loading...
