Multitech MTR-LAT1-B07 - Unavailable Services in PPP-IP Passthrough and Serial Modem Modes

CONFIGURING YOUR DEVICE
MultiConnect
®
rCell 100 MTR-LTE User Guide 41
c. To test, click Send Test Trap.
d. Click Submit.
e. Click Save and Restart.
4. For SNMP v3:
a. Enter the Destination IP address.
b. Enter Username.
c. Enter Password and Confirm Password.
d. Enter the Community Name.
e. For Engine ID, click Default and the system generates an ID for you.
f. To test, click Send Test Trap.
g. Click Submit.
h. Click Save and Restart.
Unavailable Services in PPP-IP Passthrough and Serial Modem
Modes
In both PPP-IP Passthrough and Serial Modem modes, many rCell services described in this document are non-
configurable and therefore do not appear in the device configuration menu. If you choose one of these modes, all
sections between this and the previous note on this subject are not available.