DEVICE ADMINISTRATION
MultiConnect
®
rCell 100 MTR-LTE User Guide 75
6. To set deployment-specific default settings, click Set Current Configuration As User-Defined Default.
a. A dialog box appears prompting you to confirm that you want to restore to a set of user-defined
settings.
b. Click OK.
7. To save a current configuration:
a. Click Save.
b. A dialog box appears asking you if you want to open or save the configuration file. Click Save.
c. Navigate to the location where you want to store the configuration. Click Save.
d. A progress dialog box appears to indicate that the configuration is being saved. Click Close.
Using the Debugging Options
The device has utilities to help troubleshoot and solve technical problems. You can set up your device:
To automatically reboot itself at a particular time of day or use a particular offset in hours from boot.
To record and report Syslog messages that can help you resolve potential issues with your device.
You can also communicate directly with the device's cellular radio. To do this:
1. From Administration, select Debug Options.
2. Click the down arrow to the far right of the Radio Terminal screen to view the terminal window.
3. Enter AT commands to the radio.
See also: Statistics Configuration Fields
Automatically rebooting the device
To specify the amount of time that passes before the device automatically reboots itself:
1. Go Administration > Debug Options > Auto Reboot Timer, select DISABLED, HOUR OF DAY, and TIMER
from the drop-down list under Auto Reboot.
2. In the Auto Reboot Timer field, select the Hour of the Day (0-23) and then enter Hour of the Day to
Restart (0-23).
3. If you do NOT want the device to automatically reboot, set the time to 0. The default setting is 0.
Setting up Telnet
To enable and configure Telnet on your device:
1. Go to Administration > Debug Options > Telnet, check Enabled.
2. Enter the Port number for Telnet.
3. Enter the Username.
4. Enter the Password. Enter it again under Confirm Password.
5. Click Submit.
6. To save your settings, click Save and Restart.
To Next Page
Loading...
