Cleaning
Cleaning the machine
10.06.2014 59
¾ Remove the following components:
– Diagonal insert with support bracket.
– Spacer plates.
– Sealing bars
– Insertable counter-pressure bar.
Cleaning and
disinfecting dismantled
components
¾ Take the removed components to a separate room suitable for
wet cleaning
NOTICE Danger of material damage!
The Teflon tape of the sealing bar is very sensitive.
Improper cleaning can damage the Teflon tape.
¾ Clean the Teflon tape only with a soft cloth.
¾ Do NOT scratch the Teflon tape.
¾ Clean dismantled components manually with cleaning solution.
¾ Thoroughly clean the inert gas nozzles.
To Next Page
Loading...
