MUNBYN ITPP047 - Serial Port Setting (COM Set); Number of the Copies; HEX Data; Printing Content

Page71of78
ITPP047 Thermal Printer Windows Software Manual
Version 2.00
6.2.2. Serial Port Setting (COM Set)
Serial port settings: set the serial port number, baud rate, flow.
Figure 6- 22 COM Set
6.2.3. Number of the Copies
It refers to the printing quantity of the repeat print of the test content.
Figure 6- 23 Number of the Copies
6.2.4. HEX Data
After selecting the print content, only hexadecimal transmission can be entered. (Mainly used to send commands
to the printer).
Figure 6- 24 HEX Data
6.2.5. Printing Content
Edit the printing content and send data by clicking the "Print" button.
Figure 6- 25 Input Box
6.2.6. Automatically Sending, Cycle, CutPaper
"Automatically sending": Click the "Auto Send" button and the software will automatically send the data in
the printing content column to the printer.
"Cycle": cycle time to send data automatically.
"CutPaper": The printer will automatically do paper cutting work after the cycle time.