3
FA6 Installation planning
– Connection of cold-water, drain and power 4
Simple to install 4
Placement in unit space 4
Water connection 5
Circulating-water system 5
D
irect-water system 5
Pressure requirements at water supply connection point 5
A
ir filter 5
Water discharge 5
Calculation of the size of the water trap required 5
Technical specifications 6
Electrical data – circulation pump 6
Electrical – solenoid valve for step control 6
Drain capacity 6
Sound attenuation 6
Maximum continuous operating temperature 6
IP classes 6
Electrical connections 7
Electrical connection for the pump motor 7
Electrical connection for the solenoid valve 7
Motorized drain valve 7
Programming off BMS/control system 8
Safety responsibility 8
Improper use of equipment 8
Disposal of used humidifier cassettes 8
Dimensions, weights and pump sizes 9
Installation 10
Delivery conditions and storage 10
Inspection 10
Transport and lifting 10
When delivered assembled 10
When delivered as components 11
Assembly instruction drain system FA6 12
Start-up 13
Inspection before startup 13
First start up/ Rinsing clean the humidifier 13
Adjustment of bleed-off flow 13
Service 13
Periodic maintenance 13
Annual service 13
Annual inspection 13
Cleaning distribution holes 13
Cleaning the reservoir and pump filter 14
Disassembly of cassettes and droplet separators 15
Restart after service 15
Fault-finding
Fault-finding table 16
Spare parts 17
Ordering spare parts 17
Parts list 17
Spare-parts list 18
Item number for humidifier modules 19
Item number for droplet separator 19
Contents
To Next Page
Loading...
Need help?
General
