Munters MLT350 - Markings; Supervision of Operation; Fault Indications

DehumidierML180-MLT350
1.4Markings
(GB)CHANGE FILTER
(GB)CHANGE FILTER
1
2
3
4
5
6
6
Figure1.1Identicationplateandmarkings
(GB) CHANGE FILTER
(SW) BYT FILTER
(FR) REMPLACER LE FILTER
(DE) FILTER AUSWECHSELN
6
Figure1.2Replacelter
3
Figure1.3Labelsforairinletsandoutlets
1.Unitidenticationplate
4.Processairinlet
2.Dryairoutlet5.Reactivationairinlet
3.Wetairoutlet
6.Replacelter
1.5Supervisionofoperation
Thedehumidieriscontrolledandmonitoredusingtheoperatorpanellocatedonthefrontoftheunit.
1.6Faultindications
Faultsareclearlyindicatedontheoperatorpanel,seesection6.4,Operatorpanel.
Alarmsrelatingtorelativeairhumidityaregiveninthedisplayofthehumiditycontrolsystem(ifinstalled),
seeappendix1.3,Humiditycontrolsystem.
190TGB-1034-L1604Introduction3