Muratec MFX-1300 - Attaching an Optional Handset; Installation; Packaging Contents

6-3
6.2 Attaching an optional handset
Packaging contents:
(1) Telephone handset (with curl cord) ................1
(2) Handset holder................................................1
(3) Cord holder .....................................................1
(4) Screw..............................................................2
Installation
1. Turn the fax machine off and remove the power cord and telephone line cord.
2. Using a Phillips-head screwdriver, attach the cord holder and handset holder to the left side of the
machine, using the screws included with the handset holder.
3. Plug one end of the handset cord into the PHONE1 jack on the rear side of the machine.
LINE PHONE1PHONE2