1
Basic copying 1-5
Basic copy functions
Selecting paper in the bypass tray
1
Load paper into the bypass tray.
For details, see “Loading paper into the bypass tray” in the User’s Guide.
2
Load the document.
3
Press [Copy] on My MFP Menu screen.
•If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Copy Ready”
screen is displayed.
•Set the document type, as necessary. For details, see “Setting the document type” (page 1-7).
4
Select the bypass tray.
When the correct paper size is displayed, proceed to step 9.
5
Press [Advanced].
To Next Page
Loading...
Need help?
General
