Muratec MFX-3530 Copier Guide

3-2 Specifying default settings
Specifying default settings
The default values are those applied when you press <Reset>.
The machine returns to the default setting when you press <Reset> or the machine is left
idle without any operation for a designated period of time.
Changing the default values of often-used functions can shorten the time required to
adjust settings.
NOTE
You can set the time it takes to return to the default setting. For details, see Chapter 1,
“Specifying default settings” in the Administrator’s Guide.
Specifying default copy function settings
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu
screen is displayed.
2
Press [Default Settings].
3
Press [Copy Settings].
4
Press [Default Settings].

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English