Muratec MFX-3530 Copier Guide

1
2
Advanced copy functions 2-19
Advanced copy functions
Scanning the next document
When you cannot load all the documents on the automatic document feeder or when you
want to scan multiple pages on document glass, use this setting to continuously scan
document of a large volume.
NOTE
The next document setting is enabled automatically at sorting (page 2-5) or card
copy (page 2-16), or at combine copy (page 2-7) or duplex copy (page 2-9) when the
document is loaded on the document glass.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Copy Ready” screen
is displayed.
3
Press [Advanced].
4
Press [Next Doc.].
5
Select [ON], and press [Enter].
•“ADF” stands for automatic document feeder.
•“FBS” stands for document glass (flat bed scanner).
•Select [OFF] to deselect the setting.
6
Press [Close].

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English