1
Basic copying 1-3
Basic copy functions
Basic copying
Making copies
This section describes the often-used basic procedure for making copies.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
•If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Copy Ready”
screen is displayed.
•Set the document type, as necessary. For details, see “Setting the document type” (page 1-7).
3
Enter the number of copies using the numeric keys.
You can set 1 to 99 copies.
4
Press <Start>.
•To cancel copying, press <Stop>.
•When all the documents are scanned and “Copy Reserve Ready” is displayed, you can load
the next document and start scanning.
To Next Page
Loading...
Need help?
General
