Muratec MFX-3530 Copier Guide

2-4 Advanced copy functions
Advanced copy functions
Setting the contrast
Set the contrast to scan with according to the document.
Auto: Select to scan with the darker contrast.
Lightest: Select to scan with the lightest contrast.
Lighter: Select to scan with a contrast between the normal contrast and the lightest contrast.
Normal: Select to scan with the normal contrast.
Darker: Select to scan with a contrast between the normal contrast and the darkest contrast.
Darkest: Select to scan with the darkest contrast.
1
Load the document.
2
Press [Copy] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Copy Ready” screen
is displayed.
3
Press [Contrast].
If [Contrast] is not displayed, press [Advanced] and then select [Contrast].
4
Select the desired contrast, and press [Enter].
DarkerLighter
Lightest Darkest
Normal
5
Press <Start>.

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English