1
2
3
Specifying default settings 3-5
Machine settings
Settings the copy reservation
When this function is enabled, you can start scanning the document while the machine is
printing out the former job. Copy reservation is enabled at shipment.
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu
screen is displayed.
2
Press [Default Settings].
3
Press [Copy Settings].
4
Press [Other Settings].
5
Press [Copy Reservation].
6
Select [ON], and press [Enter].
Select [OFF] to deselect the setting.
To Next Page
Loading...
Need help?
General
